A mechanically resistant 2-pack epoxy coating with low solvent content. Low solvent content according to Protective Coatings Directive of German Paint Industry Association (VdL-RL 04).
High film thickness up to 200 μm per coat
Tough, hard and abrasion resistant
Suitable for cathodic protection systems
Quick curing
Norsok approved
Can be used as a corrosion protection coating system for hydraulic steel structures (e.g. flood gates, steel sheet piles, etc.), where a mechanically resistant coating is required. Tough hard, easily applied high-build system. Also suitable as a fast curing single layer system of low solvent content for the corrosion protection of steel constructions (workshop application).
Black, redbrown, approx. RAL 7032, approx. RAL 9002 Slight colour deviations are possible due to raw material characteristics.
Dura-Plate® Poxicolor SW N tends to chalking and yellowing if exposed to weathering. In case of higher requirements an additional 2-pack PU topcoat e. g. Acrolon® EG-4 or Acrolon® EG-5 is recommended.
A two component material supplied in separate containers to be mixed prior to use: 15 kg (9.3 litre) unit when mixed Volume will vary with colours and density.
International Customers (English)
Phone: +49 7042 109 4400
pm.customerservice@sherwin.com
Swiss Customers
Phone: +41 44 936 77 90
cspmbubikon@sherwin.com
Italian Customers
Phone: +39 051 770 612
cspm.italy@sherwin.com
Swedish Customers
Phone: +46 381 26104
cspm.sweden@sherwin.com
Spanish Customers
Phone: +34 96 121 89 80
pedidos.valencia@sherwin.com
Hungarian Customers
Phone: +48 882 817 420
cs.pm@sherwin.com
Polish Customers
Phone: +48 886 342 873
cs.pm@sherwin.com
Romanian Customers
Phone: +40 256 420 320
sales.balkan@sherwin.com
