A mechanically resistant 2-pack epoxy coating with 100 % volume solids. Solvent free according to Protective Coatings Directive of German Paint Industry Association (VdL-RL 04).
Wide range of dry film thicknesses per coat from 200 - 1000 μm (nominal dry film thickness: 500 µm)
Tough, hard, abrasion and impact resistant
Solvent-free and tar-free
Suitable for cathodic protection systems
Norsok approved
Can be used as a corrosion protection coating system for hydraulic steel structures (e.g. flood gates, steel sheet piles, etc.), where a mechanically resistant coating is required.
Black, redbrown, approx. RAL 7032, approx. RAL 9002
Slight colour deviations are possible due to raw material characteristics.
Dura-Plate® SW-501 tends to chalking and yellowing if exposed to weathering. In case of higher requirements an additional 2-pack PU topcoat e. g. Acrolon® EG-4 or Acrolon® EG-5 is recommended.
A two component material supplied in separate containers to be mixed prior to use: 15 kg (10.7 litre) unit when mixed Volume will vary with colours and density.
International Customers (English)
Phone: +49 7042 109 4400
pm.customerservice@sherwin.com
Swiss Customers
Phone: +41 44 936 77 90
cspmbubikon@sherwin.com
Italian Customers
Phone: +39 051 770 612
cspm.italy@sherwin.com
Swedish Customers
Phone: +46 381 26104
cspm.sweden@sherwin.com
Spanish Customers
Phone: +34 96 121 89 80
pedidos.valencia@sherwin.com
Hungarian Customers
Phone: +48 882 817 420
cs.pm@sherwin.com
Polish Customers
Phone: +48 886 342 873
cs.pm@sherwin.com
Romanian Customers
Phone: +40 256 420 320
sales.balkan@sherwin.com
